low budget do it yourself rotisserie motor deer deterrent
A
5/16th hex key is the size I ended up using for the low
budget do it yourself rotisserie motor backyard deer deterrent.
The trick is connecting this
hex key to the rotisserie motor shaft holder in a way that it won't
fall off.
You'll
need to open up the
motor case, which is just a few screws. Remove the shaft connector from
the motor. Notice how it almost fits the hey key? Place it on a solid
surface and force the curved end where a rotisserie shaft would
normally go. Use a few light taps of a hammer to firm it into place.
Test the connection by trying to pull them apart. If it's a bit loose
add some heavy duty glue or epoxy. Mine seemed pretty well stuck and
it's still holding without any adhesive.
The next step is to
re-install the shaft holder onto the motor and put the case back
together.
Now you're ready to start
making some automatic deer deterrent noise and motion, which is what
the next post will explain.